机器参数

Front-end Paper Receiving Arm 前端接纸部位

Adopted pneumatic lifting structure, which can suit for die cutting height of different printing machine and convenient for front-end 

print machine to dismantle and mount the templates.

Equipped with iron trim strip paper pressing mechanism and a medium-pressure fan, which can make the paperboard smooth and 

smooth into the waste main transmission bearing.

接纸部位配有压条和中压风机，从而使得纸板顺利而平整的进入清废主传动轴内。

接纸平台采用气动升降，可适应不同印刷机的模切高度，方便模板的拆装。

Bearing 轴

The main transmission bearing by independent motor, consisted by four whole bearings with concave wheel surface, divided into 

the top and bottom of each two, and on the wheel surface every five centimeters a groove, it easy to adjust the belt freely according 

to the actual size of the carton board, to ensure that the special-shaped carton passed smoothly and avoid causing the damage to 

the cardboard. 

The vibration bearing drive is controlled by an independent motor, and can be controlled separately. The speed adjustment is convenient, and can ensure the jitter stroke.

The vibration bearing is operated with two bearings, and each axis has three chattering points, so as to speed up the jitter frequency and improve the jitter effect.

主传动轴采用独立电机传动，由四条带凹形轮面的整轴，分上下各两条，轮面每五公分一个槽，方便根据实际纸板尺寸随意调整皮带，

确保异形纸箱的顺利通过和避免对纸板产生损伤。

抖动轴传动由独立电机控制，可单独控制，速度调整方便，确保抖动行程。

抖动轴采用双轴运行，且每轴有三个抖动点组成，以加速抖动频率，提高抖动效果。

Vibrating Cleaner System 清废系统

The front-end of the waste cleaner is equipped with medium-pressure fan to achieve the effect of waste cleaning and at the same 

time make the paperboard close to the conveyor belt for smooth delivery.

The waste cleaning mechanism is composed of dual vibrating cleaning structures. Each one is driven by an independent motor, and 

can achieve better effect of waste paper removal through different vibrating frequencies.

The rear-end of the waste cleaner is equipped with axial fan and brush device so that the vibrating waste paper can fall from the 

paperboard in order to achieve the best cleaning effect. 

The plane belt equipped on both sides at the bottom of the waste cleaner and the waste paper division board equipped at the rear 

end, convenient to match the waste paper output belt to completely output the waste paper, reducing waste paper cleaning.

清废机前端配有中压风机，进行清废的同时，可使纸板能贴紧输送皮带平稳运行。

主要的清废机构由双震荡清废机械结构组成，每个震荡清废结构由独立电机传动，通过不同程度的抖动频率可实现更好的清废效果。

后端设有轴流风机和毛刷设置，使抖动起来的纸板废屑更容易掉落，实现清废的最佳效果。

清废部下方两侧设有的斜坡式平面带和清废后端设有的废纸导输板，可以方便配合废纸输出皮带将废纸完全输出，节省废纸的清理工

作。